The advantages of recruiting the services of a security professional in the installation of a surveillance system in your new home cannot be overlooked. Having spent so much on moving into your new home, spending extra on a good surveillance system might seem out of the question. Because of this, self-installation can seem like a good idea, especially if you feel tech-savvy. Nonetheless, you need to be very careful when setting up the CCTV system because of the sensitivity of security. This article highlights a few pointers on how to set up your CCTV correctly system for maximum protection.
Consider Weather Conditions -- It is critical to consider climatic changes concerning the location of CCTV cameras before you start the installation process. For instance, there are surveillance cameras that will trigger an alarm with the slightest of movements. If you install such cameras in locations where they are susceptible to being knocked around by winds or heavy rains, then you will continuously get false alarms. Additionally, weather conditions might affect the natural angle of your cameras, changing the field of capture. Ensure that the CCTV cameras are protected from high winds and heavy rains. You can achieve this by fixing the cameras in the protective housing.
Avoid Blocking Cameras -- As mentioned earlier, some surveillance cameras can be triggered to start recording if movement is detected. Obviously, blocking the vision of the cameras will compromise the alarm system and increase the chances of missing any odd activity. Notably, always ensure that you do not block the view of any cameras. For example, stacking boxes or placing tall pot plants will work against the system. Keep any obstacles out of the line of sight of your CCTV cameras for improved security. It is a good idea to install cameras on high elevations and face them downwards.
Clean Lenses After Installation -- Just like the lenses on eyeglasses, the clarity of CCTV camera lenses gets affected by fingerprints. If you are installing the system on your own, the chances are that your fingers will find their way onto the glass. A common mistake people make when setting up their camera system is that they forget to wipe off the lenses immediately after installation. It affects the camera's clarity and subsequently affects the ability of the entire system. Therefore, make sure that you wipe off the lenses with the recommended solvent right after installation.
When installing CCTV alarms, make sure you pay careful attention to how the system works so that you can best secure your property.